Please note that this service is provided in Lithuania and Estonia.
Lithuania:
Make sure the car is unlocked.
Take the car keys and find the charging coin (RFID key) attached (there are two coins: one for "IgnitisON" and one for "ElintaCharge").
In case of charging at the "IgnitisON" charging station or "ElintaCharge" fast charging station:
Approach the charging station, scan the charging token, and choose "Stop Charging" ("Sustabdyti").
Wait a few seconds until the charging process is fully stopped.
Gently unplug the cable from the vehicle and leave it at the charging station.
In case of charging the vehicle at a 2-slot "ElintaCharge" station:
Scan the charging token and wait for a few seconds until the word "Charging" on the station stops lightning.
Wait a few seconds until the charging process is fully stopped.
Gently unplug the cable from the charging station first and then unplug it from the CityBee vehicle.
Don't leave the cable at the charging station, put the cable back in the car:
• In the case of the VW e-Crafter electric van - under the front center seat
• In the case of a passenger car - to the spare wheel space in the trunk.
If you cannot unplug the cable from the car easily, take the car keys and press the "Unlock" button twice again.
Estonia:
Make sure the car is unlocked
Take the 'Eleport' charging card from sun visor
To disconnect the charger in Eleport charging station:
Take the Eleport charging card and tap it on the reader
Press ''Stop Charging'' (''Lõpeta laadimine'') - this process may take up to 30 seconds
Disconnect the charging cable from the car and put it back to the charger
